# By default, this file should be stored in /etc/teleport.yaml

# Configuration file version. The current version is "v3".
version: v3

# This section of the configuration file applies to all teleport
# services.
teleport:
    # nodename allows one to assign an alternative name this node can be
    # reached by. By default it's equal to hostname.
    nodename: graviton

    # Data directory where Teleport daemon keeps its data.
    # See "Storage backends" for more details
    # (https://goteleport.com/docs/setup/reference/backends/).
    data_dir: /var/lib/teleport

    # PID file for Teleport process
    #pid_file: /var/run/teleport.pid

    # The invitation token or an absolute path to a file containing the token used
    # to join a cluster. It is not used on subsequent starts.
    # If using a file, it only needs to exist when teleport is first ran.
    #
    # File path example:
    # auth_token: /var/lib/teleport/tokenjoin
    #
    # This is the same as setting join_params.method to "token", and join_params.token_name
    # to the value of auth_token.
    # You should only use either auth_token or join_params.
    auth_token: xxxx-token-xxxx

    # join_params are parameters to set when joining a cluster via
    # EC2, IAM or a token.
    #
    # EC2 join method documentation:
    # https://goteleport.com/docs/setup/guides/joining-nodes-aws-ec2/
    # IAM join method documentation:
    # https://goteleport.com/docs/setup/guides/joining-nodes-aws-iam/
    join_params:
        # When `method` is set to "token", it is the equivalent to using `auth_token` above.
        # You should only use either auth_token or join_params.
        method: "token"|"ec2"|"iam"

        # If method is "iam" or "ec2", token_name will be will be the name of
        # the joining token resource, e.g., "ec2-token" or "iam-token" as created
        # in the Joining Nodes via EC2 or IAM guides.

        # If method is "token", token_name will be the invitation token
        # or an absolute path to a file containing the token used to join a cluster.
        # It is not used on subsequent starts.
        # If using a file, it only needs to exist when teleport is first ran.
        #
        # File path example:
        # token_name: /var/lib/teleport/tokenjoin
        token_name: "token-name"

    # Optional CA pin of the auth server. This enables a more secure way of
    # adding new nodes to a cluster. See "Adding Nodes to your Cluster"
    # (https://goteleport.com/docs/setup/admin/adding-nodes).
    ca_pin: "sha256:7e12c17c20d9cb504bbcb3f0236be3f446861f1396dcbb44425fe28ec1c108f1"

    # When running in multi-homed or NATed environments Teleport Nodes need
    # to know which IP it will be reachable at by other Nodes.
    #
    # This value can be specified as FQDN e.g. host.example.com
    advertise_ip: 10.1.0.5


    # Teleport provides HTTP endpoints for monitoring purposes. They are
    # disabled by default but you can enable them using the diagnosis address.
    # See the Teleport metrics reference:
    # https://goteleport.com/docs/management/diagnostics/metrics/
    diag_addr: "127.0.0.1:3000"


    # Only use one of auth_server or proxy_server.
    #
    # When you have either the application service or database service enabled,
    # only tunneling through the proxy is supported, so you should specify proxy_server.
    # All other services support both tunneling through the proxy and directly connecting
    # to the auth server, so you can specify either auth_server or proxy_server.

    # Auth Server address and port to connect to. If you enable the Teleport
    # Auth Server to run in High Availability configuration, the address should
    # point to a Load Balancer.
    # If adding a node located behind NAT, use the Proxy URL (e.g. teleport-proxy.example.com:443)
    # and set `proxy_server` instead.
    auth_server: 10.1.0.5:3025

    # Proxy Server address and port to connect to. If you enable the Teleport
    # Proxy Server to run in High Availability configuration, the address should
    # point to a Load Balancer.
    proxy_server: teleport-proxy.example.com:443

    # cache:
    #  # The cache is enabled by default, it can be disabled with this flag
    #  enabled: true

    # Teleport throttles all connections to avoid abuse. These settings allow
    # you to adjust the default limits
    connection_limits:
        max_connections: 1000
        max_users: 250

    # Logging configuration. Possible output values to disk via
    # '/var/lib/teleport/teleport.log',
    # 'stdout', 'stderr' and 'syslog'. Possible severity values are DEBUG, INFO (default), WARN,
    # and ERROR.
    log:
        output: /var/lib/teleport/teleport.log
        severity: INFO

        # Log format configuration
        # Possible output values are 'json' and 'text' (default).
        # Possible extra_fields values include: timestamp, component, caller,
        # and level.
        # All extra fields are included by default.
        format:
          output: text
          extra_fields: [level, timestamp, component, caller]