This PR adds a command to view the provisioner and agent logs for a
given workspace.
Note: I did investigate using the existing `cliui` methods to tail the
logs but they are tailored to a very specific use-case.
Other changes:
- Adds `Agents` to `dbfake.WorkspaceResponse`
- Adds methods to generate provisioner and agent logs in `dbgen`
---------
Co-authored-by: Steven Masley <Emyrk@users.noreply.github.com>
DRAFT: I'd like feedback on this approach for 1k before I give the others the same treatment and add a 10k document.
- Bumps database requirements to 8 vCPU, 30 GB memory. In our testing database was nearly always the bottleneck. (This could come back down again with improvements to how we use it.)
- Removes specific machine type recommendations.
- This only applies to VM-based deployments and many of our customers use Kubernetes.
- The major clouds upgrade their machine teirs, so our recommendations go out of date
- In its place we just give CPU and memory requirements
- Removes API requests per second
- It's not a metric that many operators will know until they are already operating
- Our API requests vary wildly in cost depending on what they are
- Replaces them with Users | Running Workspaces | Concurrent Builds - which represents our scale testing scenarios, and are easier for operators to reason about.
- Removes specific advice about workspace sizing, instead gives the minimum specs for the agent
- Gives Kubernetes resource request/limits in notes
- Adds advice about not needing high performance disks for Coderd, but that provisioners will benefit.
Because this affects more than just the template insights
page (specifically it also affects the deployment stats endpoint which
is shown on bottom bar and Prometheus), the group is being renamed
generically to just "stats collection". In the future if we need to
affect the other stats we can put those options here.
Then, because this change only affects a portion of stats, specifically
usage stats like connection and application time, bytes sent, etc, add a
new sub-group called "usage stats".
Then finally add back the "enable" flag. This also gives us a place to
one day place an "anonymize" flag if we need to go that route.
## Description
Adds the core AI Bridge MITM proxy daemon. This proxy intercepts HTTPS traffic, decrypts it using a configured CA certificate, and forwards requests to AIBridge for processing.
## Changes
* Added `aibridgeproxyd` package with the core proxy server implementation
* Added configuration options: `CODER_AIBRIDGE_PROXY_ENABLED`, `CODER_AIBRIDGE_PROXY_LISTEN_ADDR`, `CODER_AIBRIDGE_PROXY_CERT_FILE`, `CODER_AIBRIDGE_PROXY_KEY_FILE`
* Added tests for server initialization and MITM functionality
Closes https://github.com/coder/internal/issues/1180
A simple typo fix to the help text
stidin > stdin
```
➜ coder git:(org_role_fix) ✗ coder organizations roles create -h
coder v2.29.1+59cdd7e
USAGE:
coder organizations roles create [flags] <role_name>
Create a new organization custom role
- Run with an input.json file:
$ coder organization -O <organization_name> roles create --stidin < role.json
```
This removes the deprecated AITaskPromptParameterName constant and all
backward compatibility code that was added for v2.28.
- Remove AITaskPromptParameterName constant from codersdk/aitasks.go
- Remove backward compatibility code in coderd/aitasks.go that populated
the "AI Prompt" parameter for templates that defined it
- Remove the backward compatibility test (OK AIPromptBackCompat)
- Update dbfake to no longer set the AI Prompt parameter
- Remove AITaskPromptParameterName from frontend TypeScript types
- Remove preset prompt read-only feature from TaskPrompt component
- Update docs to reflect that pre-2.28 definition is no longer supported
Task prompts are now exclusively stored in the tasks.prompt database
column, as introduced in the migration that added the tasks table.
Fix a typo in the MCP documentation where "seems" should be "sees":
> These inner loops are not relayed back to the client; all it **sees**
is the result of this loop.
Found while reading the docs.
**Breaking Change:** Existing oauth apps might now use PKCE. If an
unknown IdP type was being used, and it does not support PKCE, it will
break.
To fix, set the PKCE methods on the external auth to `none`
```
export CODER_EXTERNAL_AUTH_1_PKCE_METHODS=none
```
closes: https://github.com/coder/internal/issues/858
Similar to https://github.com/coder/coder/pull/19375, this one uses
system permissions for fetching actual user and group data.
Modifies the `workspaces_expanded` view to fetch the required data; this way it's made available to all code paths that make use of it.
Also fixes a bug in a test helper function that can result in `null` being saved to the DB for `user_acl` or `group_acl` and break tests; a defensive check constraint that prevents this is worth a PR, e.g:
`ALTER TABLE workspaces
ADD CONSTRAINT group_acl_is_object CHECK (jsonb_typeof(group_acl) = 'object');`
Also adds missing `OwnerName` in `ConvertWorkspaceRows`.
Closes#20399
To summarize the original commit messages:
- Do not log stats to the database.
- Return errors on the insight endpoints.
- Update the frontend to show those errors.
- Also fixes an issue with getting the user status count via codersdk,
since I added a test to ensure it was not disabled by this flag and it
was sending the wrong payload.
## Summary
This adds configurable overload protection to the AI Bridge daemon to
prevent the server from being overwhelmed during periods of high load.
Partially addresses coder/internal#1153 (rate limits and concurrency
control; circuit breakers are deferred to a follow-up).
## New Configuration Options
| Option | Environment Variable | Description | Default |
|--------|---------------------|-------------|---------|
| `--aibridge-max-concurrency` | `CODER_AIBRIDGE_MAX_CONCURRENCY` |
Maximum number of concurrent AI Bridge requests. Set to 0 to disable
(unlimited). | `0` |
| `--aibridge-rate-limit` | `CODER_AIBRIDGE_RATE_LIMIT` | Maximum number
of AI Bridge requests per second. Set to 0 to disable rate limiting. |
`0` |
## Behavior
When limits are exceeded:
- **Concurrency limit**: Returns HTTP `503 Service Unavailable` with
message "AI Bridge is currently at capacity. Please try again later."
- **Rate limit**: Returns HTTP `429 Too Many Requests` with
`Retry-After` header.
Both protections are optional and disabled by default (0 values).
## Implementation
The overload protection is implemented as reusable middleware in
`coderd/httpmw/ratelimit.go`:
1. **`RateLimitByAuthToken`**: Per-user rate limiting that uses
`APITokenFromRequest` to extract the authentication token, with fallback
to `X-Api-Key` header for AI provider compatibility (e.g., Anthropic).
Falls back to IP-based rate limiting if no token is present. Includes
`Retry-After` header for backpressure signaling.
2. **`ConcurrencyLimit`**: Uses an atomic counter to track in-flight
requests and reject when at capacity.
The middleware is applied in `enterprise/coderd/aibridge.go` via
`r.Group` in the following order:
1. Concurrency check (faster rejection for load shedding)
2. Rate limit check
**Note**: Rate limiting currently applies to all AI Bridge requests,
including pass-through requests. Ideally only actual interceptions
should count, but this would require changes in the aibridge library.
## Testing
Added comprehensive tests for:
- Rate limiting by auth token (Bearer token, X-Api-Key, no token
fallback to IP)
- Different tokens not rate limited against each other
- Disabled when limit is zero
- Retry-After header is set on 429 responses
- Concurrency limiting (allows within limit, rejects over limit,
disabled when zero)
Add screenshots to the dev containers user guide:
- Running dev containers with sub-agents (index.md, working-with-dev-containers.md)
- Discovered dev containers with Start button (index.md)
- Outdated status with rebuild option (working-with-dev-containers.md)
- Display apps disabled (customizing-dev-containers.md)
Also deletes the outdated devcontainer-agent-ports.png.
Refs #21157
Adds `--disable-workspace-sharing` option.
Workspace sharing is disabled by not including user and group ACLs in
the workspace RBAC object, which prevents ACL-based authz.
Closes https://github.com/coder/internal/issues/1072
The commit also adds saving of workspace user/group ACLs in the test DB
data generator.
The _redirects file format is used by Netlify and Cloudflare Pages, but
coder.com runs on Vercel with Next.js. Redirects for coder.com/docs must
be configured in the coder/coder.com repository redirects.json file.
This file was never functional and caused confusion when renaming docs.
Co-authored-by: blink-so[bot] <211532188+blink-so[bot]@users.noreply.github.com>
The user guide jumped straight into integration details without explaining
what dev containers are. Now it opens with a brief orientation linking to
the spec, then explains this guide covers the Docker-based approach.
Converted several NOTE callouts to prose where they were just cross-references
or stacked unnecessarily. The Envbuilder index note was reframed to lead with
its strengths rather than "we recommend the other thing."
Also updates platform support to Linux only per current status.
Refs #21157
Dev container admin docs were scattered across two locations: the Docker-based
integration under extending-templates/ and Envbuilder under managing-templates/.
There was no landing page explaining that two approaches exist or helping admins
choose between them.
This moves everything under admin/integrations/devcontainers/ with a decision
guide at the top. Dev containers are an integration with the dev container
specification, so integrations/ is a natural fit alongside JFrog, Vault, etc.
Stub pages remain at the original locations for discoverability.
New structure:
admin/integrations/devcontainers/
├── index.md # Landing page + decision guide
├── integration.md # Docker-based dev containers
└── envbuilder/
├── index.md
├── add-envbuilder.md
├── envbuilder-security-caching.md
└── envbuilder-releases-known-issues.md
Refs #21080
docs: rewrite dev containers documentation for GA
Corrects inaccuracies in SSH examples (deprecated `--container` flag),
port forwarding (native sub-agent forwarding is primary), and
prerequisites (dev containers are on by default). Fixes template
descriptions: docker-devcontainer uses native Dev Containers while
AWS/Kubernetes templates use Envbuilder.
Renames admin docs folder from `devcontainers/` to `envbuilder/` to
reflect actual content. Adds customization guide documenting agent
naming, display apps, custom apps, and variable interpolation. Documents
multi-repo workspace support and adds note about Terraform module
limitations with sub-agents. Fixes module registry URLs.
Refs #18907
## Summary
Change `@Tags` from `Organizations` to `Enterprise` for `POST /licenses`
and `POST /licenses/refresh-entitlements` to match the `GET` and
`DELETE` license endpoints which are already tagged as `Enterprise`.
## Problem
The license API endpoints were inconsistently tagged in the swagger
annotations:
- `GET /licenses` → `Enterprise` ✓
- `DELETE /licenses/{id}` → `Enterprise` ✓
- `POST /licenses` → `Organizations` ✗
- `POST /licenses/refresh-entitlements` → `Organizations` ✗
This caused the POST endpoints to be documented in the [Organizations
API docs](https://coder.com/docs/reference/api/organizations) instead of
the [Enterprise API
docs](https://coder.com/docs/reference/api/enterprise) where the other
license endpoints live.
## Fix
Simply updated the `@Tags` annotation from `Organizations` to
`Enterprise` for both POST endpoints.
This was an oversight from the original swagger docs addition in #5625
(January 2023).
Co-authored-by: blink-so[bot] <211532188+blink-so[bot]@users.noreply.github.com>
Removes references to adding database replicas from the scaling docs, as Coder only allows a single connection URL. These passages where added in error.
Previously AI Bridge retention was only documented in the auto-generated
CLI reference, making it difficult for administrators to discover and
understand how to configure data retention for compliance requirements.
This adds retention configuration to the AI Bridge setup guide with
examples, documents the REST API and CLI export options in the monitoring
guide, and cross-references AI Bridge from the central data retention
page for discoverability.
Closes#21038
Replace hardcoded 7-day retention for workspace agent logs with
configurable retention from deployment settings. Defaults to 7d to
preserve existing behavior.
Depends on #21038
Updates #20743
Document configurable retention policies for Audit Logs, Connection Logs,
and API keys. Add new data-retention.md page and update existing docs to
reference it.
Depends on #21021
Updates #20743
Yevhenii Shcherbina